Smiths Medical Pneupac compPAC 200 ventilator with PS12 power supply and charger

Smiths Medical Pneupac compPAC 200 Portable Emergency Ventilator + PS12 Charger

£299.00
Skip to product information
Smiths Medical Pneupac compPAC 200 ventilator with PS12 power supply and charger

Smiths Medical Pneupac compPAC 200 Portable Emergency Ventilator + PS12 Charger

£299.00

Smiths Medical / Pneupac compPAC 200 portable emergency and transport ventilator supplied with Pneupac PS12 power supply & battery charger.

used condition, 

Included

  • Pneupac compPAC 200 ventilator – green case variant, Part No. 510A2433
  • Pneupac PS12 power supply & battery charger – REF 525A1034
  • Ventilator/charger connection cable
  • Only the items shown in the photos are included

Key Specifications

  • Minute volume adjustment: approximately 6–14 L/min
  • Respiratory rate: approximately 10–30 breaths/min
  • Nominal I:E ratio: 1:1.6
  • Inflation pressure manometer: -10 to +100 cmH₂O
  • High-pressure relief/alarm: approximately 60 cmH₂O
  • Gas inlet: 280–600 kPa (approx. 43–87 psi), maximum flow marked 45 L/min
  • Oxygen / air-mix selection when used with a suitable external gas supply
  • External electrical supply: 24/28 V DC compatible
  • Rugged portable housing for field, emergency and transport applications

PS12 Power Supply / Charger

  • Model: PS12 Power Supply & Battery Charger for compPAC ventilator
  • REF: 525A1034
  • IP54 rated
  • DC input marked: 22–32 V, 4 A max; 10–22 V charging only
  • AC input marked: 85–265 V, 50/60 Hz, 120 W max
  • Manufactured in the UK by Smiths Medical International Ltd.

Condition

Used condition with visible cosmetic marks, paint wear and scratches consistent with previous use/storage. No full clinical performance or calibration test has been carried out by us. Please review all photos carefully for the exact physical condition and included parts.

Important Disclaimer

This is used medical equipment intended for purchase by suitably qualified organisations, biomedical engineers or professional users. The buyer is responsible for inspection, functional testing, servicing, calibration and confirming suitability before any clinical or patient use. CE marking is visible on the equipment. Historical FDA documentation identifies the compPAC 200 as a powered emergency ventilator under 510(k) K021841; this does not represent certification of the condition or current regulatory status of this individual used unit. Regulatory and import requirements vary by destination and remain the buyer's responsibility.

 

You may also like